manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 409 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 409

I

   

 

Reference

- 3

 in marker functions menu. Makes reference level of graticule equal to

Reference

marker value; does not change reference 

position. 

If markers are off, it 

turns on marker   at its previous setting or the center frequency (default).

Access Keys: 

 

 

Marker

 in 

 menu. Invokes menu to select delta marker mode,

marker to center, marker to reference, and marker math functions.

 in marker functions menu. Brings up menu to select statistics,

Math

flatness, and RF filter statistics calculations on user-defined trace segments.

See 

 , 

 

 

 , and Statistics in this chapter.

Access Keys: 

 

 

 in 

 menu. Displays marker search menu to perform various

marker search functions.

See ‘Using Markers” in Chapter 4 for more information.

 

 in marker limits menu. Use this key to set the maximum limit for the

marker limit function that is currently highlighted in the on-screen table.

See “lb Use Marker Limit Functions” in Chapter 4 for more information.

Access Keys: 

 Limit Menu 

 

 Limit 

 

 in marker search menu. Places the active marker at the frequency

point of maximum amplitude. If tracking is off, marker remains at that

frequency. If tracking is on, marker moves to the maximum point with each

sweep.

See “Using Markers” in Chapter 4 for more information.

Access Keys: 

 

 Search

9 - 4 6

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов