Honeywell Gamewell-FCI E3 Series, Руководство по установке и эксплуатации

Страница: 15 / 190

14 E3 Series Installation/Operation Manual
—
P/N 9000-0574:I 11/04/10
System Overview Optional Modules
1.4.6 Addressable Node Expander (ANX)
The ANX (Addressable Node Expander) is a network interface sub-assembly component of the
Gamewell-FCI, E3 Series
®
fire alarm control panel. The ANX network interface communicates
between the E3 Series fire alarm control panel and the FocalPoint Graphic Workstation. There are
three types of ANX sub-assemblies:
• Addressable Node Expander - Single Ring (ANX-SR)
• Addressable Node Expander - Multi-Ring Twisted Pair (ANX-MR-UTP)
• Addressable Node Expander - Multi-Ring Fiber Optic (ANX-MR-FO)
Each of the three ANX sub-assemblies provides Ethernet connectivity via a 10/100Mbps Ethernet
port using the Micro Internet Protocol (uIP
™) fi
rmware module. For additional information on the
ANX and the Micro Internet Protocol (uIP
™) firmware module, refer to Section 3.7.
1.4.7 Remote LED Driver (ANU-48)
The ANU-48 LED Driver provides output for up to forty-eight (48), remote LEDs. The ILI-MB-E3
and ILI95-MB-E3 will support up to a total of sixteen (16), ANU-48 and/or ASM-16 units. The
ANU-48 can be remotely located via the RS-485 serial interface.
1.4.8 LCD Network Graphic Annunciator (NGA)
The NGA mounts in the E3 Series enclosure or it may be remotely located. It provides an LCD
display of system events, together with system status indicating LEDs and touch-screen switches
for Alarm Acknowledge, Trouble Acknowledge, Signal Silence and System Reset. The NGA
occupies one node on the Broadband network. The background display can be programmed to
display,
“Command Center in Control.”
1.4.9 Remote LCD Display (LCD-7100)
The LCD-7100 Remote LCD Display provides an 80-character display and function keys for the
following:
It features a key switch that renders the keypad inoperative until activated. The E3 Series System
can support up to five (5), LCD-7100 displays. The 80-character display shows all pertinent
information except for menus.
1.4.10 Intelligent Network Interface
– Voice Ga
teway (INI-VG
Series)
The INI-VG Voice Gateway provides a network interface for the E3 Series Expandable Emergency
Evacuation System.
• The INI-VGC-FO or INI-VGC-UTP is used
in conjunction with the Voice Evacuation
Command Center (INCC-C).
• The INI-VGX-FO or INI-VGX-UTP is used with the E3 Series
®
Broadband System.
• The INI-VGE-FO or INI-VGE-UTP is used with the E3 Series
®
Classic System.
Each of the INI-VG Series sub-assemblies occupy one node on the Broadband Network.
• “Alarm Acknowledge” • “System Reset/Lamp Test”
• “Trouble Acknowledge” • “System Drill Test”
• “Signal Silence”