Hitachi RWM-(H)FSN3E, Руководство по обслуживанию

Страница: 63 / 424

2 Unit installation
SMGB0070 rev. 1 - 08/2011
53
2
2.3.2 Unit installation
Transport the products as close as possible to the installation location before unpacking. Check the contents of the pac -
kage:
• DHWT Model
• Installation and Operation Manual & Documents
2.3.3 Selection procedure for DHWT units
N O T E
• DHWT appliance is intended to be installed in an indoor place.
• DHWT installation must be done by professional installers.
• Install the DHWT with sufficient clearance around it for operation and maintenance as shown in the following
figures.
• Install the DHWT where good ventilation is available. Do not install the DHWT where there is a high level of oil
mist, salty air or sulphurous atmosphere.
• When installing some device next to DHWT, keep clearance between DHWT and any other obstacle of more
than 500 mm.
C A U T I O N
• Insufficient ventilation can cause oxygen deficiency.
• Working with no sufficient ventilation, in an enclosed space, should cause can produce toxic gas, especially
when cleaning agent is heated to high temperature by, e.g., being exposed to fire.
• Do not install DHWT near any flammable substance.
2.3.4 Working space
• Check that DHWT are installed vertically.
• For cleaning, use no flammable and no toxic cleaning liquid. The use of flammable agents should cause explosion or
fire.
• Cleaning liquid shall be collected after cleaning.
• Pay attention do not trap cables when closing the electrical box cover. It could cause a electric shock.