Hitachi RWM-(H)FSN3E, Руководство по обслуживанию

Страница: 181 / 424

5 Control system
SMGB0070 rev. 1 - 08/2011
171
5
N O T E
The same process applies to circuit 2 when selected on the menu.
In summary, the binding process for intelligent thermostat follows the steps below:
- Ensure that thermostats are in the off position.
- Press the button on the receiver for 15 seconds in order to remove the current configuration.
- Press the button on the receiver for 5 seconds.
- Select the circuit to be linked on the binding menu. Press the start button on the screen.
- Start the binding mode on the thermostat. Refer to its instruction manual.
- Press Ok button on the thermostat to confirm binding.
- The display will show a confirmation message. If the binding is not confirmed for 30 seconds, an error message will
appear.
N O T E
Be carefull because if the power supply is stopped on the remote thermostat or his receiver, it will keep the last
temperatures, room setting and room temperature. This values will be send if user change the setting on the remo -
te control, if user do not change the setting value, the communication will send again the last value in a maximum
period of one hour.