Hitachi RWM-(H)FSN3E, Руководство по обслуживанию

Страница: 184 / 424

5 Control system
SMGB0070 rev. 1 - 08/2011
174
Programming the Room Unit (Heating)
- The Built-in Heating Program
The built-in heating program has 6 temperature level changes per day that can be set between 3.00 am and 2.50 am the fo-
llowing day - allowing you to maintain the evening temperature after midnight. Each temperature level can be set between
5°C and 35°C, and adjusted in 0.5°C increments. The factory default program for heating is as follows.
Monday to Friday
(Day 1 to 5)
Period 1 2 3 4 5 6
Time 6:30 8:00 12:00 14:00 18:00 22:30
Temperature 21°C 18°C 21°C 18°C 21°C 18°C
Saturday & Sunday
(Day 6 & 7)
Period 1 2 3 4 5 6
Time 8:00 10:00 12:00 14:00 18:00 23:00
Temperature 21°C 21°C 21°C 21°C 21°C 18°C
- Reviewing the Heating Program
To review or edit the heating program use the PROGRAM or buttons to navigate between the 6 individual program-
ming periods for that day. Use the
button to step through each day of the week, so the complete 7 day heating program
can be reviewed or edited.
- Modifying the Heating Program
Š
To change the heating program:
a. Press either of the PROGRAM or buttons to enter the programming
mode. The time / temperature settings for period 1 on Monday (Day 1) will
be flashing as shown. The active period is highlighted by a flashing squa -
re around the numbers at the bottom of the screen and the selected day is
shown with the day indicator.
b. To adjust the period start time use the or buttons, the ‘OK?’ indicator
will be displayed to confirm the change. Holding the button down will change
the time quickly.
1 2 3 4 5 6 7
1 2 3 4 5 6
N O T E
If you are pressing the or buttons and the display flashes the next period, it means the next period will be
pushed forward.
c. Once the required time is reached press the green button to confirm.
N O T E
If the original time setting did not require adjustment press the green button to move to step ‘d’.
d.
The temperature setting for period 1 on Monday (Day 1) will now be flashing. To adjust this press the or
buttons and confirm the setting again by pressing the green button.
e. The next time and temperature period will now be active. Adjust this by repeating steps b - d above until all 6 periods
are set for Monday or press the button to run the program as set, at any time.