Hitachi RWM-(H)FSN3E, Руководство по обслуживанию

Страница: 209 / 424

6 LCD user’s interface
SMGB0070 rev. 1 - 08/2011
199
6

Test Run
When outdoor test run is selected, the remote control will ask for the duration of the test, and the working mode will be the same as that
explained in the normal user chapter, only with the Installer mode icon on the notifications bar.

Optional Function
This will include the same parameters as those in user mode, with the addition of the following parameters.
CODE REF Description Default Value Range Steps Units
- SP Seizure Protection - - - -
8-020 hsb Hydraulic Separator Status Disabled
Disabled
Enabled
- -
Seizure Protection
This view includes the following variables.
CODE REF Description Default Value Range Steps Units
8-002 SeizPr Seizure Protection Status Disabled
Disabled
Enabled
- -
8-010 OpInt Operation Day Mon Mon ~ Sun - Day
8-011 StTim Start Time (00~24) 01:00 (00~24) - Time
These Installer parameters control the optional seizure function. They are used to enable seizure protection and set its
activation time. When this happens, follow these instructions:
• Make sure mixing valves are fully opened and then fully closed (time depends on runtime parameter).
•
Diverting valves are switched on for 1 minute.
• Pumps are switched on for 1 minute.
Restore default settings
When “Restore Default Settings” is selected, the unit
control will ask the user to confirm.
Press OK to reset all settings.
Press Cancel to not take any action.
RESTORE DEFAULT SETTINGS
Press OK to reset all settings.
Press Cancel to not take any action.
The “No” option is selected by default. Pressing “Yes” will reset the factory settings.