Hill-Rom Primo P02033, Руководство пользователя

Страница: 45 / 398

170924(2) - EN - Primo
™
User Manual Page 39
PROPRIETARY AND CONFIDENTIAL DRAFT: octobre 11, 2012
Appen
dix
Manufacturer’s declaration - Electromagnetic Compatibility
Electromagnetic emissions compliance
Electromagnetic immunity compliance
Manufacturer's recommendations and declaration – electromagnetic emissions
The Primo
™
is intended for use in the electromagnetic environment specified below. The customer or
the user of the Primo
™
should make sure it is used in such an environment.
Emission test Compliance Electromagnetic environment - Recommendations
RF emissions
CISPR 11
Group 1
The Primo
™
only uses RF energy internally.
Consequently, it only produces very weak RF emissions
that are unlikely to cause interference with nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The Primo
™
is suitable for use in all establishments,
including domestic premises and premises directly
connected to the public low-voltage power supply in
residential buildings.
Harmonic emissions
IEC 61000-3-2
Class A
Emissions of voltage
fluctuations/flicker
IEC 61000-3-3
Compliant
Manufacturer's recommendations and declaration – electromagnetic immunity
The Primo
™
is intended for use in the electromagnetic environment specified below. The customer or
the user of the Primo
™
should make sure it is used in such an environment.
Immunity test
Test level
IEC 60601
Compliance
Electromagnetic environment -
Recommendations
Electrostatic
discharge
(ESD)
IEC 61000-4-2
±6 kV on contact
±8 kV in the air
±6 kV on contact
±8 kV in the air
Floors should be made of wood,
concrete or ceramic tiles. If the floor is
covered with a synthetic material,
relative humidity must be at least
30%.
Fast electric
transients in
bursts
IEC 61000-4-4
±2 kV on power
supply lines
±1 kV for the
input/output lines
±2 kV on power
supply lines
±1 kV for the
input/output lines
The quality of the electric power
supply should be the equivalent of
that found in commercial or hospital
environments.
Shock waves
IEC 61000-4-5
±1 kV between line(s)
±2 kV between line(s)
and earth
±1 kV between line(s)
±2 kV between line(s)
and earth
The quality of the electric power
supply should be the equivalent of
that found in commercial or hospital
environments.
Magnetic field
at the
frequency of
the mains
power supply
(50/60 Hz)
IEC 61000-4-8
3 A/m 3 A/m
The magnetic field at the frequency of
the mains supply must be of a level
that is characteristic of a place
located in a commercial or hospital
environment.