Hanwha Vision LRN-1610S, Руководство пользователя

Страница: 6 / 83

6_ live
live
3. Set the administrator password on the < recorder Id/pw > screen and click the < next > button.
Click < > to view the basic guide for setting a password. Refer to the password setup rules.
4. Set the camera password in factory reset on the < camera Id/pw > screen.
If ID/PW is already set in the camera, register the ID/PW and click < next >.
` When the password is in factory reset, it can be changed and managed in a batch.
` Up to 3 sets of camera ID with password and password can be registered.
`
You may change the passwords for all registered cameras by navigating to Menu > Camera > Camera Password .
`
You cannot change password of a camera registered using ONVIF or RTSP.
5. Set the date, time, time zone, and DST on the < date/time > screen, and then click the < next > button.
` If the LAN cable is not connected to the port, the setting button will not be activated for use. Check the LAN cable connection.
(But in case of a PoE product, Network 1 is activated.)
`
The built-in DHCP Server in Recorder will turn on automatically at stage 2. At this stage, using the existing DHCP server in the
same network may cause a problem, as two DHCP servers would be simultaneously operating.
` A product with multiple network ports cannot use a single bandwidth for all of them.
example)
- Port 1: 192.168.100.199 / Port 2: 192.168.100.198 (X)
- Port 1: 192.168.100.199 / Port 2: 192.168.101.198 (O)
Setting the Switch mode
Set the camera registration method. This function is only available for products with PoE support.
For products with PoE support, see “ products supporting each feature ”. (See page 4 of the Product
Specification Manual)
• PnP Mode : Camera connected to the PoE port of the product will be registered automatically on each
channel in the order of the port number.
- When the camera is factory reset, it defaults to the ID and password set during the < camera Id/pw >
step.
- If the camera's ID and password have already been set, the registered information matches the ID and
password set during the < camera Id/pw > step. (up to 3 sets)
If the camera uses a static IP, it can be registered only if it has the identical bandwidth with Network1's IP
bandwidth.
• Manual Setup Mode : Automatically scans and registers camera connected to the product’s PoE and camera
with separate switch.