Hanwha Vision LRN-1610S, Руководство пользователя

Страница: 46 / 83

46_ menu setup
menu setup
DDnS
If a remote user accesses the network, you can set whether or not to use DDNS and the site to be connected.
menu > network > DDnS
• DDNS Site : Specify the use of DDNS and select a site that you registered.
• Server Name : Enter the server name registered with the DDNS site.
• Product ID : Enter the DDNS site user name.
• Host Name : Enter the hostname registered with the DDNS site.
• User Name : Enter the user name registered with the DDNS site.
• Password : Enter the user password registered with the DDNS site.
`
See " Using virtual keyboard " in the Appendix.
`
If you select < Not Use >, the input box will be inactive.
`
If you select < ddns.hanwha-security.com >, the host name input box will be inactive.
• Quick Connect : Appears if the < ddns.hanwha-security.com > is selected for a < DDnS Site >.
To use the function, set to < use > after connecting the Recorder to a UPnP router.
`
If canceled during Quick Connect configuration, it automatically switches to < Not Use > and saved.
`
If you are setting up a port that is already in use, then the connection might fail. Check the port setup of your router.
`
Server name, product ID, and quick connect can be displayed if you set < DDNS Site > to < ddns.hanwha-security.com >.
` DDNS is a short form of Dynamic Domain Naming System.
DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www.google.
com) to an IP address consisting of numbers (64.233.189.104).
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS server so that the
domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
to check Quick Connect status
A progress bar and its message appears for a Quick Connect.
• Quick Connect Success : Message for a successful connection.
• Invalid network Configuration : Message appears if the network configuration is not valid. Check the
configuration.
• please enable upnp function of the router : Message appears if the router requires UPnP function
enabled.
• Failed to find the router : Message appears if the router is not found. Check the router's configurations.
• please restart the router : Message appears if the router should be restarted.
DDnS Setting
• Setting DDnS in the Recorder
In the < protocol > menu of the connected Recorder, set < protocol type >.
- The Protocol type can only be set to TCP.
• DDnS Settings of the Router
Select the corresponding menu for the network transfer protocol of the router.
• Setting up upnp of Router
Refer to the router's documentation to enable the UPnP function of the router.