Hanwha Vision LRN-1610S, Руководство пользователя

Страница: 48 / 83

48_ menu setup
menu setup
802.1x
When connecting to a network, you can select whether to use the 802.1x protocol and install a corresponding
certificate.
802.1x is a certificate system for the server and the client. It can guarantee robust performance against hacking
into the Tx/Rx network data, virus or information leaks.
By using this system, you can block access from a client who is not certified and only allow communication to
certified users and thus increase the level of security.
menu > network > 802.1x
• EAPOL Version : Select the EAPOL version to be used as protocol.
` Some switch hubs will not operate if you set them to version < 2 >. Select version < 1 >.
• ID : Enter the ID provided by the RADIUS server administrator.
` If the entered ID does not match the ID of the client's certificate, it won't be processed properly.
• Password : Enter the password provided by the RADIUS server administrator.
` If the password you entered does not match that of the client's private key, it won't be processed properly.
• Certificates : Search for a device. Click on to search for a device again.
• CA Certificate : Select this only if your public certificate includes the public key.
• Client Certificate : Select if the public certificate includes a client's authentication key.
• Client Private Key : Select it if the public certificate contains the client private key.
` For successful implementation of the 802.1x operating environment, the administrator must use the RADIUS server.
In addition, the switch hub connected to the server must be a device that supports 802.1x.
` If the time setting of the RADIUS server, the switch hub and an Recorder device do not match, communication between them
can fail.
`
If a password is assigned to the client's private key, the server administrator should confirm the ID and password.
The ID and password allow up to 30 characters each. (But it only supports letters, numbers and special characters ("-", "_", "."
3 types) only.
Accessing non password-protected files is allowed without entering a password.
`
The 802.1x protocol adopted by the Recorder is EAP-TLS.
`
You need to install all three certificates to use 802.1x.
e-mail
You can send an e-mail to a Recorder-registered user at a specific time interval, or if an event occurs.
Smtp Setting
Sets the SMTP mail server.
menu > network > e-mail > Smtp
• Server Address : Enter the SMTP server address to connect to.
• Port : Sets the communication port.
• Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
- ID : Enter a ID to use authentication when connecting to the SMTP server.
- Password : Enter the password of the SMTP server user.
• Secure Transfer : Select one from < never > and < tLS (if available) >.
• Sender : Use the virtual keyboard to enter the sender's e-mail address.
` See " Using virtual keyboard " in the Appendix.
• E-mail Test : Conducts the test on the server settings.