Hanwha Vision LRN-1610S, Руководство пользователя

Страница: 44 / 83

44_ menu setup
menu setup
Alarm Out Schedule
You can set the conditions and operating hours for scheduled alarms.
menu > event > Alarm Out Schedule
• Alarm Out : Sets the alarm output method.
` For alarm output, see the " HDD Alarm Setting " in " Menu Setup > Setting the Device " in the Table of Contents.
- < Off > : Marked in black, no alarm is generated even if an event occurs.
- < On > : Marked in green, and always generates alarm on scheduled time.
- < event > : Marked in orange, generates alarm only when an event occurs.
• Apply to All Alarm out : Applies the configured schedule to all alarms.
` When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.
netWORK COnFIguRAtIOn
It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with
events. You can configure the network environment which enables such functions.
Interface
You can set the network connection route and protocol.
Setting a network connection
Sets the protocol and environment of the network.
menu > network > Interface
• Network : Each product supports a different number of network ports. If it supports two or more network
ports, you can set the network for each function as follows.
• Network 1(Camera) : Can be used as a port for connecting a camera. If you connect a camera, then the
camera video will be transmitted. Using the network information, you can access the web viewer.
`
If a UTP cable is used for connection, (UTP) is displayed; if a fiber optic cable, (Optic).
• Network 2 (All) : It can be used as a common port for camera and web viewer connection.
- IP Type : Select the type of network access.
- IP Address, Subnet Mask, Gateway, DNS
` Static : IP address, subnet mask, gateway, and DNS can be directly entered.
` DHCP : IP address, subnet mask, gateway, and DNS can be automatically set.
`
PPPoE : IP address, subnet mask, gateway, and DNS can be automatically set.
- User ID, Password : To set the IP Type to PPPoE, enter the " user ID " and " password " registered to
PPPoE.
• Transfer Bandwidth : Enter the max data rate for transfer.
• Default Gateway : Can set the default gateway. If there are multiple network ports, set one of them as the
default gateway.
` The DNS values of < DHCP > and < PPPoE > can be directly entered only if you have selected < Manual >.