Hanwha Vision LRN-1610S, Руководство пользователя

Страница: 36 / 83

36_ menu setup
menu setup
hDD Alarm Setting
For HDD malfunctions, you can set the inspection alarm output terminal, the replacement alarm output terminal
and the alarm time.
menu > Device > Storage Device > hDD Alarm
• Alarm
- If < All > was selected, both beep sound and alarm signal through rear side ports will output.
- If < Beep > was selected, a beep will sound.
- If you select an alarm output terminal number, a signal is displayed on the alarm output terminal at the
back. Each product has a different number of alarm output terminals.
• Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm
output port.
• Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified
alarm output port.
• Duration : Sets the alarm duration for the alarm signal and beep sound.
` < Check > status means that the HDD is operating but it has problems that require technical examination.
( ) appears on the Live screen.
` < Replace > status means that the HDD has defect and requires immediate replacement.
( ) appears on the Live screen.
Remote Devices
This function is only available for products that support the use of a remote controller. For products that support
remote controls, see page 4 “ products supporting each feature ” of the Product Specification Manual)
You can adjust the ID for a remote control to be used in connection with Recorder.
menu > Device > Remote Device
• Remote control: Select whether to use a remote control.
• ID: Select an ID number linked to a camera.
If the remote control ID does not match, it will not operate properly.
` To change the remote controller ID, see " Using a remote controller > Changing the Remote Control ID ” in the Appendix.