Hanwha Vision LRN-1610S Скачать руководство пользователя страница 32

Страница: 32 / 83

32_

menu setup

Setting the Remote profile

You can set the video profile transmitted to the network.

menu > Camera > profile > Remote

•

CH : Click <

> to display the channel information table.

•

Profile : Select a network profile for the connected camera.

•

Codec : Show the codec information for the selected network profile.

•

Resolution : Display the resolution for the selected network profile.

•

Frame Rate : Shows the selected network profile's frame rates.

•

Edit : You can change, modify, and delete camera profiles.

If the profiles used for network and recording are different, camera's video feed may not comply with the frame rate as

specified in the camera.

Setting the Live profile

You can change the live transfer settings of the network camera.

menu > Camera > profile > Live

•

CH : Click <

> to display the channel information table.

•

Live Replacement : You can select the live profile setup mode.

If you select <

manual

>, the profile setup items are enabled, and you can change settings manually.

- Auto: For the profile for live monitoring, a profile optimized for each split mode is displayed, along with the

Live4nVR

' profile automatically generated at the time of the camera registration.

Live4NVR profile default: H.264 800 x 600, 800 x 448 30 fps

- Manual : Live monitoring is performed with the profile selected by the user from the registered camera

profiles.

- Recording : Live monitoring is performed with the profile set for recording.

•

Profile : You can set the camera profile.

•

Codec : Show the codec of the selected profile.

•

Resolution : Show the resolution of the selected profile.

•

Frame Rate : Show the frame rate of the selected profile.

•

Edit : You can change, modify, and delete camera profiles.

Содержание LRN-1610S




















































































Результаты поиска

Содержание LRN-1610S

Отзывы:

Бренды по названию

Популярные бренды

Hanwha Vision LRN-1610S, Руководство пользователя

Результаты поиска

Содержание LRN-1610S

Отзывы:

Бренды по названию

Популярные бренды