61 ENGLISH
Note:
The speed dome starts a linear scan from the left limit to the right limit, and you must set the left
limit on the left side of the right limit. Also, the angle from the left limit to the right limit should be
no more than 180º.
4.2.8 Calling Linear Scan
Follow the procedure to call the linear scan in the predefined scan range.
Steps:
1.
Click the button <PTZ> in the lower-right corner of the <PTZ Settings> interface;
Or press the <PTZ> button on the front panel or click the <PTZ Control> icon
in the quick
setting bar to enter the <PTZ Settings> menu in the live view mode.
2.
Click the <One-touch> tab to show the one-touch function of the PTZ control.
PTZ Panel - One-touch
3.
Click the <Linear Scan> button to start the linear scan and click the <Linear Scan> button again
to stop it.
You can click the <Restore> button to clear the defined left limit and right limit data and the
dome needs to reboot to make the settings take effect.
4.2.9 One-Touch Park
For certain models of the speed dome, it can be configured to start a predefined park action (scan,
preset, patrol and etc.) automatically after a period of inactivity (park time).
Steps:
1.
Click the button <PTZ> in the lower-right corner of the <PTZ Settings> interface;
Or press the <PTZ> button on the front panel or click the <PTZ Control> icon
in the quick
setting bar to enter the <PTZ Settings> menu in the live view mode.
2.
Click the <One-touch> tab to show the one-touch function of the PTZ control.
