43 ENGLISH
2.9 Configuring the Signal Input Channel
Note:
This chapter is only applicable to GD-RT-AT5016N.
You can configure the analog and IP signal input types and enable 5 MP long distance transmission.
Steps:
1.
Go to
Menu > Camera > Signal Input Status
.
2.
Check the checkbox to select different signal input types: <HD/CVBS> and <IP>. If you select
<HD/CVBS, four types of analog signal inputs including <HD-TVI>, <AHD>, <HDCVI>, and
<CVBS> can be connected randomly for the selected channel. If you select <IP>, IP camera can
be connected for the selected channel.
3.
Click <Apply> to save the settings.
Note:
You can view the max. accessible number of IP cameras in the< Max. IP Camera Number> text field.
For GD-RT-AT5016N, disabling one analog channel will add one IP channel. For GD-RT-AT5016N,
the accessible IP channels are X+2 (X refers to the disabled analog channel(s) of the DVR.).
2.10 Configuring 5 MP Long Distance Transmission
Note:
This chapter is only applicable to GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016P,
GD-RT-AP5016N, GD-RT-AT5016N.
For these models you can configure 5 MP long distance transmission on the <Signal Input Status>
interface.
Steps:
1.
Go to
Menu > Camera > Signal Input Status
.
2.
Click
to enter the <5 MP Long Distance Transmission Settings> interface.
3.
Check the checkbox to enable <5 MP Long Distance Transmissio>n of the selected channel.
4.
Click <Apply> to save the settings.
