Click “OK” to delete the stored data.
PMDC Memory Bank Store/Recall:
The PMDPro can also perform individual DGD measurements and save the results to
memory. Up to 100 results can be stored.
Store DGD measurement:
To perform a DGD measurement and store the result, select the memory location in
which to store the data (“Memory Loc ID#” box). Click the “Start” button. The PMDPro
will perform the measurement and store the results to the selected location. The indicator
boxes immediately below the “Memory Loc ID#” box will display the data (DGD,
SOPMD, input and output DOP) after the measurement is completed.
Recall PMD measurement results from memory:
To recall stored PMD measurement results and display them in the table on-screen,
specify the range of memory locations to be queried by selecting the start and end ID#s
from the corresponding boxes to the left of the data table. Then, click the “RECALL”
button to display the data on screen.
Document #: GP-UM-PMD-1000-21
Page 91 of 122
