Scan SOPMD only:
This function scans through a user-defined SOPMD range with a fixed DGD value.
Selection parameters:
Fixed DGD: fixed DGD value, in ps
Start SOPMD: SOPMD start value, in ps
2
Stop SOPMD: SOPMD end value, in ps
2
SOPMD step: SOPMD step size, in ps
2
Scan Interval (on top of graph): dwell time per point, in s. Minimum value: 0.4 s.
When the scan parameters are set, click “Start” to start the scan. At each point in the scan,
the DGD, SOPMD, and maximum output DOP for that point are displayed above the
graphs, and the maximum output DOP vs. SOPMD is plotted in the graph on the left. The
maximum output DOP for the scan and the corresponding DGD and SOPMD values are
displayed below the graph.
After the scan is finished, the data can be saved to a file by clicking “SAVE DATA”.
Data is saved as a text file with 3 columns: DGD, SOPMD, and DOP.
Document #: GP-UM-PMD-1000-21
Page 82 of 122
