Document #: GP-UM-PMD-1000-21
Page 102 of 122
Figure 28 DGD/SOPMD range determinants for continuous control
Use the left and right arrow keys to move the cursor and the up and down arrow
keys to increment the digits to set the DGD and SOPMD values to be matched.
Note that the left and right arrow keys will scroll through all modifiable cursor
positions. For example, pressing the right arrow key from the rightmost digit of
the DGD setting line will move the cursor to the leftmost position of the SOPMD
setting line
When the DGD and SOPMD values are set, press the ENTER key to calculate the
closest available matches to the requested values. If the requested SOPMD is out
of range, the PMDPro will flash an “SOPMD out of range” error message before
returning to the PMD selection screen. If the selected values are within range, the
LCD will display
where the number to the right of the “C” on each line is now the calculated match
to the requested value. At this point, the PMDPro has not yet changed the output
DGD or SOPMD values; it has only displayed the results of the match calculation.
If the user is satisfied with the matched values, he can press the ENTER key again
to execute the setting and change the output DGD and SOPMD to the calculated
values. The LCD will display:
DGD:
31.04 C 31.10
SOPMD:
_ 530.0 C 530.0
Selected DGD
Maximum SOPMD
determined by
selected DGD
