10.2
An example of using the Method Editor
About the example
Creating a method involves creating and naming the method, and adding blocks and
instructions to it. In this section, a simple example is used to illustrate the different steps
in the procedure.
The method produced in this example is for training purposes only. It is not
intended as an example of a production method.
Note:
In this section
This section contains the following subsections:
See page
Section
10.2.1 Creating the method and selecting a column
10.2.2 Block 1: Opening valves
10.2.3 Block 2: Auto-zeroing pressure sensors
10.2.4 Block 3: Setting PID parameters
10.2.5 Block 4: Filling the flow kit
10.2.8 Block 7: Washing unbound sample
152
ÄKTA ready Operating Instructions 28960345 AD
10 Creating a method
10.2 An example of using the Method Editor
