Furuno GD-280, Руководство оператора

Страница: 91 / 280

4-3
6. Enter the bearing from own ship to line position. (The available bearing range is 000.0 to
359.9
°.)
If the bearing is 135
°
, for example, press [1], [3], [5].
7. Press the [ENT] key.
8. Press the [LINE ENT] key to inscribe line, in the shape and color specified.
9. Enter the range and bearing for the next point on the line.
10. Press the [LINE ENT] key to inscribe the line.
11. Repeat steps 9 and 10 to complete the line.
4.1.3 Entering lines by Loran C LOPs
1. Press [MENU], [3], [2] to open the Setting menu.
2. Press
[↓]
to select Set LN Entry Method.
3. Press
[←]
or
[→]
to select Loran C.
4. Press the [LINE START] key.
5. Enter LOP1 and LOP2. If the LOPs are 26214.3 and 47314.6, for example, press [2], [6], [2],
[1], [4], [3],
[↓
], [4], [7], [3], [1], [4], [6],
[↓]
.
6. Enter estimated latitude and longitude position of the LOPs' intersection. If the latitude is
34
°
40N and the longitude 135
°
20E, for example, press [3], [4], [4], [0], [0], [0], [0], [
↓
], [1], [3],
[5], [2], [0], [0], [0], [0]. Use the key to switch from N to S, E to W and vice versa.
7. Press the [ENT] key.
8. Press the [LINE ENT] key. Line point appears on the display.
9. Enter LOP 1 and LOP 2.
10. Enter estimated latitude and longitude position of the LOPs' intersection.
11. Press the [LINE ENT] key to inscribe the line.
12. Repeat steps 9 through 11 to complete the line.
Start Point [Loran C]

LOP 1 1 8398.3
LOP 2 37558.7
Estim Lat 32°50.400’N
Estim Long 136°47.016’E

LINE START key: Close
↑↓←→
: Sel ENT: Enter