Furuno GD-280, Руководство оператора

Страница: 93 / 280

4-5
4.1.5 Entering lines by Loran A LOPs
1. Press [MENU], [3], [2] to open the Setting menu.
2. Press
[↓]
to select Set LN Entry Method.
3. Press
[→]
to select Loran A.
4. Press the [LINE START] key.
5. Enter LOP1 and LOP2. If the LOPs are 1992.0 and 4191.6, for example, press [1], [9], [9], [2],
[0], [
↓
], [4], [1], [9], [1], [6], [
↓
].
6. Enter estimated latitude and longitude position of the LOPs' intersection. If the latitude is
34
°
35'N and the longitude 135
°
00'E, for example, press [3], [4], [3], [5], [0], [0], [0], [
↓
], [1], [3],
[5], [0], [0], [0], [0], [0]. Use the key to switch from N to S, E to W and vice versa.
7. Press the [ENT] key
8. Press the [LINE ENT] key.
9. Enter LOP 1, LOP 2.
10. Enter estimated latitude and longitude position of the LOPs' intersection.
11. Press the [LINE ENT] key.
12. Repeat steps 9 through 11 to complete the line.
Start Point [Loran A]

LOP 1 1L0: 2 072.1
LOP 2 1L1: 4207.0
Estim Lat 32°50.400’N
Estim Long 136°47.016’E

LINE START key: Close
↑↓←→
: Sel ENT: Enter