Furuno GD-280, Руководство оператора

Страница: 254 / 280

14-8
14.3.3 Remote controller test
1. Press [MENU], [0], [8] to display the Test menu.
2. Select Yes from the Remote Controller Kybd. field. The following display appears.
3. Press each key on the remoter controller one by one. The pressed keys on-screen location
lights in red if the key is normal. A key's location is blank if the key is faulty. The [DIM] key
cannot be checked. If screen does not light try replacing the batteries in the remote controller.
If that does not work, the problem may lie with the remote controller or a circuit board in the
display unit.
4. To quit the remote controller test, press the [CLR] key three times. (You may also quit the
remote controller test by pressing the [CLR] key on the display unit once.)
REMOTE CONTROLLER TEST
Press CLR Key on Remote Cont. 3 times or on Panel once to terminate the test.
EVENT SWITCH