Furuno GD-280, Руководство оператора

Страница: 60 / 280

2-22
2.6.2 Changing track line type of past track
Own ship's track is traced on the display with a solid line. If desired, past track can be traced in a
different line type to differentiate between recent and past tracks. Four types of track lines are
available as below.
1) Solid line 2) Dashed line
3) Dotted line 4) Dot-dash line
Changing line type of all past track
1. Press [MENU], [2], [8] to display the Change Color/Line Type menu.
2. Press
[→]
to select All.
3. Press
[↓]
to select Old Type, and then select line type desired.
4. Press
[↓]
to select New Type, and then select line type desired.
5. Press
[↓]
to select Track followed by track type.
6. Press the [ENT] key.
7. Press the [ENT] key.
8. Press the [MENU] key several times to close the menu.
Changing line type of specific section of track
1. Press [MENU], [2], [8] to display the Change Color/Line Type menu.
2. Press
[
←
]
to Cursor.
3. Press
[↓]
to select Old Type, and then select line type desired.
4. Press
[↓]
to select New Type, and then select line type desired.
5. Press
[↓]
to select Track followed by track type.
6. Press the [ENT] key.
7. Operate the +cursor to place the trackball on the starting point of the track you wish to
change line type and then press the [ENT] key.
8. Operate the +cursor to place the trackball on the ending point of the track you wish to
change line type and then press the [ENT] key.
9. Press the [ENT] key.
10. Press the [MENU] key several times to close the menu.