Furuno GD-280, Руководство оператора

Страница: 148 / 280

7-12
4. Press [MENU], [6], [6].
5. Reselect file selected at step 3 a), and press the [ENT] key.
6. Select Manual from the Offset field.
7. Press
[↓]
to select the Manual field.
8. Enter latitude and longitude offset values. Use the key to switch coordinates if necessary.
9. Press the [ENT] key.
10. Press the [MENU] key several times to close the menu.
To remove the offset, select Off from the Offset field at step 6 in the above procedure.
Note: Error message appears when an unformatted card is inserted or the card contains no files.
See the error message list in the Appendix for details.
7.7.2 Automatic offset
1. Insert memory card in proper drive.
2. Press [MENU], [6], [6] to display the Display SRAM Card menu. A list of files stored on the
card appears on the display.
3. Press
[↑]
or
[↓]
to select file and press the [ENT] key.
4. Select Auto from the Offset field.
5. Press the [ENT] key.
6. Press the [MENU] key several times to close the menu.
To remove the offset, select Off from the Offset field at step 4 in the above procedure.