Furuno GD-280 Скачать руководство пользователя страница 7

Страница: 7 / 280

INTRODUCTION

FURUNO Electric Company thanks you for considering and purchasing the FURUNO Color GPS

Plotter GP-280/380/680, Color Video Plotter GD-280/380/680. We are confident you will discover

why FURUNO has become synonymous with quality and reliability.

For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for efficient

and dependable marine electronics equipment. This dedication to excellence is furthered by our

extensive global network of agents and dealers.

Your unit is designed and manufactured to meet the rigorous demands of the marine

environment. However, no machine can perform to the utmost of its ability unless properly

operated and maintained. Please carefully read and follow the recommended procedures for

operation and maintenance.

We would appreciate hearing from you, the end-user, about whether we are achieving our

purposes.

Thank you for considering and purchasing FURUNO.

Features

Plotter section

•

The GP/GD-280/380/680 mostly shares the same features. The main difference between the

units is the display unit size and equipment incorporated.

GP/GD-280: 12-inch display

GP/GD-380: 15-inch display

GP/GD-680: 21-inch display

Equipment available with the GP-280/380/680

•

Standard supply (GPS Plotter)

•

DGPS Kit (Built in DGPS beacon receiver)

•

FD Kit (Floppy disk drive), Radar Overlay Kit

•

DGPS Kit, FD Kit, Radar Overlay Kit

Equipment available with the GD-280/380/680

•

Standard supply (Plotter functions only)

•

FD Kit (Floppy disk drive), Radar Overlay Kit

•

On-screen data include ship's position in latitude and longitude, speed and course, cursor

position, range and bearing to cursor, and range and bearing to waypoint.

•

Alarms: Arrival alarm, Anchor Watch alarm, Cross-track Error alarm, Border alarm, Ship's

speed alarm, Wake-up alarm, etc.

•

Built-in memory stores 20,000 points total of tracks, marks, lines and comments, 194

waypoints, 10 routes with up to 10 waypoints per route.

•

Target points (Max. 10) for marking special locations.

Содержание GD-280

























































































































































































































































































Результаты поиска

Содержание GD-280

Отзывы:

Похожие инструкции для GD-280

Бренды по названию

Популярные бренды

Furuno GD-280, Руководство оператора

Результаты поиска

Содержание GD-280

Отзывы:

Похожие инструкции для GD-280

Бренды по названию

Популярные бренды