background image

D200926

Setup Guide

MIMAKI ENGINEERING CO., LTD.

TKB Gotenyama Building, 5-9-41, Kitashinagawa, Shinagawa-ku, Tokyo 141-0001, Japan

Phone:  +81-3-5420-8671      Fax:  +81-3-5420-8687

URL: http: // www.mimaki. co. jp /

E-mail:  [email protected]

Table of contents

For safe operation ........................................................... 2

Pictorial signs ............................................................................................ 2

Example of pictorial signs ......................................................................... 2

Precautions in installation .......................................................................... 5

Precautions in use ...................................................................................... 6

Precautions in handling the ink cartridge .................................................. 8

Where to Install the Device ............................................ 9

Unpacking and Assembling ......................................... 10

Assembling the pedestals and the device ................................................ 10

Mounting the protection cover for 440cc ink cartridges ......................... 15

Assembling Rear Exhaust Duct ............................................................... 17

Assembling drier fan Unit ....................................................................... 18

Assembling Front Exhaust Unit .............................................................. 19

Leading the exhaust hose to the left ........................................................ 24

If the roll screen spring has lost its elasticity .......................................... 25

Setting the heater voltage ............................................ 26

Connecting the Cables ................................................. 27

Connecting the interface cable ................................................................ 27

Connecting the power cable .................................................................... 28

Turning the power ON ................................................... 29

Filling Ink for First Time ................................................ 30

Turning the power OFF ................................................. 31

Accessories ................................................................... 32

Содержание JV3-160SP



































Отзывы: