Fujitsu PRIMEQUEST 1000 Series, Руководство пользователя

Страница: 113 / 905

SVmco User Guide
105

In Windows
To write data for investigation to the C:\temp\mco_dump.file
> getosvmco C:\temp\dump\mco_dump
(4) End status
0: Normal end
>0: Abnormal end
3.5 SNMP Security Setting Command
(setsnmpsec)
The setsnmpsec command sets security for SNMP Service (by specifying the
hosts from which to accept SNMP packets). If the SNMP Service security setting
is [Accept SNMP packets from any hosts], you need not execute this command.
Use this command when you have changed the MMB IP address of the PSA-
MMB LAN after SVmco installation on a system operating with the SNMP
service security setting of [Accept SNMP packets from these hosts]. Also use
the command when you have changed the SNMP service security setting from
[Accept SNMP packets from any hosts] to [Accept SNMP packets from these
hosts].
Remarks

This command is available only in Windows.