FujiFilm FM-DP L, Руководство по обслуживанию, Страница: 69 / 380

H3-26
006-252-02 10.22.99 FM2569
FM-DP L
Service Manual
H3-26
MAINTENANCE 3. TROUBLESHOOTING
Error Code Table (Printer)
Error code Error name Significance Probable cause and remedy
Detailed
information format
0200
Conveyance system file
error
Conveyance system related external file
access error
·File read error
·File write error
·File conversion error
·File line specification error
·File column specification error
2-1-E
0210
Tray 1
Tray detection sensor
error
Attempted to check the tray 1
open/close state during initialization and
removal, but could not determine the
open/close state.
Malfunction of SA6 or SNS board.
1. Check SA6 using M-Utility.
2. Adjust the mounting position of SA6.
3. Replace SA6.
4. Replace the SNS board.
2-1-A
2-2-A
0213
Tray 1
Shutter detection
sensor error
Attempted to check the tray 1 shutter
present/absent state during initialization
and removal, but could not determine the
present/absent state. Malfunction of SA5 or SNS board.
1. Check SA5 using M-Utility.
2. Replace SA5.
3. Replace the SNS board.
2-1-A
2-2-A
0215
Tray 2
Tray detection sensor
error
Attempted to check the tray 2
open/close state during initialization and
removal, but could not determine the
open/close state.
Malfunction of SB6 or SNS board.
1. Check SB6 using M-Utility.
2. Adjust the mounting position of SB6.
3. Replace SB6.
4. Replace the SNS board.
2-1-B
2-2-A
0217
Tray 2
Shutter detection
sensor error
Attempted to check the tray 2 shutter
present/absent state during initialization
and removal, but could not determine the
present/absent state. Malfunction of SB5 or SNS board.
1. Check SB5 using M-Utility.
2. Replace SB5.
3. Replace the SNS board.
2-1-B
2-2-A
0221
Tray 1/suction cup unit
upper dead-point
deviation error
Attempted to move the tray 1 suction
cup unit from the upper dead-point
during removal initialization, but SA1 did
not become OPEN. The following motor/sensor/part may be faulty. Correct
according to the troubleshooting procedure for this error code
in "3.1.4 Troubleshooting Flow".
SA1/MA1
2-1-A
2-2-A
0222
Tray 1/suction cup unit
upper dead-point return
error
Attempted to move the tray 1 suction
cup unit to the upper dead-point during
removal initialization, but SA1 did not
become CLOSE. The following motor/sensor/part may be faulty. Correct
according to the troubleshooting procedure for this error code
in "3.1.4 Troubleshooting Flow".
SA1/MA1
2-1-A
2-2-A
0223
Tray 2/suction cup unit
upper dead-point
deviation error
Attempted to move the tray 2 suction
cup unit from the upper dead-point
during removal initialization, but SB1 did
not become OPEN. The following motor/sensor/part may be faulty. Correct
according to the troubleshooting procedure for this error code
in "3.1.4 Troubleshooting Flow".
SB1/MB1
2-1-B
2-2-A
The memory card is not set properly in the CPU board, or
memory card error, CPU board malfunction. Or the data is
inappropriate or insufficient.
1. Set the memory card properly in the CPU board.
2. Replace the memory card with a new one.
3. Replace the CPU board.
4. Re-install and check again.