FujiFilm FM-DP L, Руководство по обслуживанию, Страница: 120 / 380

H3-77
006-252-05 06.30.01 FM3040
FM-DP L
Service Manual
H3-77
MAINTENANCE 3. TROUBLESHOOTING
Error code Error name Significance Probable cause and remedy
Detailed
information format
2250
Tray 1 film suction error
Failed in film suction during removal at
tray 1.
The following motor/sensor/part may be faulty.
Correct according to the troubleshooting procedure for this error
code in "3.1.4 Troubleshooting Flow".
SA8/PA1/SVA1/Deterioration of suction cup
2-1-A
2-2-A
2254
Tray 1 film drop error
Film sucked once dropped during
removal at tray 1. (Retry)
The following motor/sensor/part may be faulty.
Correct according to the troubleshooting procedure for this error
code in "3.1.4 Troubleshooting Flow".
SA8/PA1/SVA1/Deterioration of suction cup
2-1-A
2-2-A
2255
Tray 1 removal unit
leading edge detection
error
Attempted to convey the sucked film to
the removal conveyance roller during
removal at tray 1, but SA4 did not
become CLOSE. (Retry) The following motor/sensor/part may be faulty.
Correct according to the troubleshooting procedure for this error
code in "3.1.4 Troubleshooting Flow".
SA4/MA2
2-1-A
2-2-A
2256
Tray 2 film surface
detection error
Attempted to move the suction cup unit
from the upper dead-point to the
surface detection position during
removal at tray 2, but SB3 did not
become CLOSE. (Retry)
The following motor/sensor/part may be faulty.
Correct according to the troubleshooting procedure for this error
code in "3.1.4 Troubleshooting Flow".
SB3/MB1
2-1-B
2-2-A
2257
Tray 2 film suction error
Failed in film suction during removal at
tray 2.
The following motor/sensor/part may be faulty.
Correct according to the troubleshooting procedure for this error
code in "3.1.4 Troubleshooting Flow".
SA8/PA1/SVA1/Deterioration of suction cup
2-1-B
2-2-A
2261
Tray 2 film drop error
Film sucked once dropped during
removal at tray 2. (Retry)
The following motor/sensor/part may be faulty.
Correct according to the troubleshooting procedure for this error
code in "3.1.4 Troubleshooting Flow".
SA8/PA1/SVA1/Deterioration of suction cup
2-1-B
2-2-A
2262
Tray 2 removal unit
leading edge detection
error
Attempted to convey the sucked film to
the removal conveyance roller during
removal at tray 2, but SB4 did not
become CLOSE. (Retry) The following motor/sensor/part may be faulty.
Correct according to the troubleshooting procedure for this error
code in "3.1.4 Troubleshooting Flow".
SB4/MB2
2-1-B
2-2-A
2270
(*2)
Sensor state 2 error
Attempted to set the sub scanning unit
grip to the entrance grip state before
conveying to the sub scanning unit, but
SD2 did not become CLOSE and SD3
did not become OPEN.
The following motor/sensor/part may be faulty. Correct
according to the troubleshooting procedure for this error code
in “3.1.4 Troubleshooting Flow”.
SD2/SD3/MD2
2-1-C
2-2-A
*2: Main unit software version B02 or later.