FujiFilm FM-DP L, Руководство по обслуживанию, Страница: 37 / 380

H3-6
MAINTENANCE 3. TROUBLESHOOTING
006-252-04
03.22.00 FM2742
FM-DP L Service Manual H3-6
3.1.2 Format of Detailed Information
Perform this check only for analyzing error codes.
In the usual troubleshooting, find the corresponding error code from the error code
tables, refer to the suspected causes and remedy methods indicated to resolve the
problem.
However if the problem still persists, or to investigate the problem in further detail,
check the following detailed information to analyze the problem.
Checking Detailed Information of Error Codes
(1) Check the corresponding error code and its detailed information at the error
display screen, or at [System Management], [Error Log Data], [Display Error
Log #1] of the M-Utility.
(2) Check the detailed information format number at "3.1.3 Error Code Tables"
and refer to the corresponding format.
(3) Find the format information from the 4-digit detailed information, and
analyze the problem.
FP3F0505.EPS
0 SC1 SC2 SC3 SD2 SD3
FFM
rotation
state
FFM
drive
SA1 SA2 SA3 SA4 SA5 SA6 SA7 SA8
0 0 1 0 0 0 0 0 1 0 0 0 1 1 1 0
M-UTILITY
Error log 1 display
P. 0221. 208E. 9902221200
0221
Tray 1/
suction cup unit upper
dead-point deviation error
Attempted to move the suction cup unit
of tray 1 from the upper dead-point
during removal initialization, but SA1
did not set to the OPEN. The following motor/sensor/part may be faulty.
Correct according to the troubleshooting
procedure for this error code in "3.1.4
Troubleshooting Flow". SA1/MA1
2-1-A
2-2-A
2 0 8 E
2-1-A (Upper removal unit - before-sub-scanning conveyor)
(1)
(2)
(3)