FujiFilm FM-DP L, Руководство по обслуживанию, Страница: 323 / 380

H3-260
MAINTENANCE 3. TROUBLESHOOTING
006-252-05
06.30.01 FM3040
FM-DP L Service Manual H3-260
Power OFF
FP3F0E85.EPS
Power ON
Check attaching positions of SJ2/SJ3/SB6.
If normal, replace SJ2/SJ3/SB6.
Check error generation state.
Check error details at [Error Log Data]
of M-Utility.
N
Are +5Vcc/+15VM/+24VC/+24VD
voltages output normally?
Refer to "3.5 Troubleshooting
Reference".
Y
Are SJ2/SJ3/SB6 normal?
Check at [Sensor Monitoring] of
[Check Mechanism] of M-Utility.
N
Recover NFB.
For direct-bonded fuse, replace
the SNS11A or DRV11A board.
Y
Are NFB of power supply unit and
NFB2 of DRV11A board, and NFB1
of SNS11A board normal?
Refer to "3.5 Troubleshooting Reference".
N
Replace fuse.
Y
Is fuse of power supply unit normal?
Refer to "3.5 Troubleshooting Reference". N
Y
Are cables normal?
Check connector connection, cable
conduction, and connector pins.
Repair or replace.
N
Replace power supply unit.
Y
2
Insert tray shutter.
Check film stop position and state.
Remove cover.
1
Power OFF
Y
Is ME1 normal?
Check at [Grip] of [Check Mechanism]
of M-Utility.
N
N
Replace DRV11A
board.
Repair or replace.
Check attaching state of drive
gear, damage, wear, and then
replace and adjust parts as
required.
Y
Is drive system mechanism of
transport unit grip mechanism
normal?
Rotate ME1 gear with hand, and check
that roller moves up and down smoothly.
Replace ME1.
Y N
Is motor normal?
Perform pulse motor inspection.
Refer to "3.5 Troubleshooting Reference".
Y
Are cables normal?
Check connector connection, cable
conduction, and connector pins.
N
Y
Is transport unit grip normal?
Check that clearance is 0.5 mm at
[Grip] of [Check Mechanism] of
M-Utility.
N
Adjust home position.
Refer to "3.5 Troubleshooting Reference".