FujiFilm FM-DP L, Руководство по обслуживанию, Страница: 112 / 380

H3-69
006-252-02 10.22.99 FM2569
FM-DP L
Service Manual
H3-69
MAINTENANCE 3. TROUBLESHOOTING
Error code Error name Significance Probable cause and remedy
Detailed
information format
1A14
HD write error
Could not write the data in the HD during
the HD READ/WRITE test. 1. Check the HD setting.
2. Replace the HD.
None
1A15
HD read error
Could not read the data in the HD during
the HD READ/WRITE test. 1. Check the HD setting.
2. Replace the HD.
None
1A16
Verify check error
Failed verify check during the HD
READ/WRITE test.
1. Check the HD setting.
2. Replace the image memory.
3. Replace the CPU board.
None
1A21
FD access error (During
write)
Failed in writing the following data in the
FD.
1. Backup RAM data
2. Error code
The corresponding file does not exist in the FD during READ.
During WRITE, the FD is write-protected, unformatted, or
damaged.
1. Replace with a proper FD. Release the protect when writing.
2. Replace the FDD.
3. Replace the CPU board.
None
1A21
FD access error (During
read) Failed in loading the FD in the backup
RAM.
A file exists in the FD but cannot be read during READ.
The file or FD is damaged.
1. Replace with a proper FD.
2. Replace the FDD.
3. Replace the CPU board.
None
1A31
Bus controller/DSP start
error Failed in starting the bus controller DSP
during the image READ/WRITE test.
Check the IMG board state before executing the image
READ/WRITE test.
If the error has already occurred, check the state before
executing image READ/WRITE test.
Perform the following is no error.
1. Replace the IMG board.
2. Replace the CPU board.
None
1A32
Image processing failure
Failed in image processing during the
image READ/WRITE test.
1. Replace the IMG board.
2. Replace the CPU board.
3. Replace the image memory.
None
1A36
Verify check error
Failed verify check during the image
READ/WRITE test.
1. Replace the IMG board.
2. Replace the image memory.
3. Replace the CPU board.
None
1B01
Memory card mounting
error
Failed in mounting the memory card.
The memory card is not set correctly to the CPU board, or
defect of the memory card, defect of the CPU board.
1. Set the memory card correctly to the CPU board.
2. Replace the memory card.
3. Replace the CPU board.
None
1B02
Memory card control
error
Failed in control of the memory card.
The memory card is not set correctly to the CPU board, or
defect of the memory card, defect of the CPU board.
1. Set the memory card correctly to the CPU board.
2. Replace the memory card.
3. Replace the CPU board.
None