Fuji Xerox DocuColor 1256 GA Series, Руководство пользователя, Страница: 59 / 265

Loading Paper
43
3
You can change the size and orientation of the paper that you load in trays 2, 3 and 4. However,
only standard paper sizes can be loaded. Use tray 5 (bypass) if you need to make copies onto non-
standard size paper. In the case of tray 1, no change is allowed because it has been fixed at A4 .
●
The size of paper that can be loaded differs for each tray. See “3.1 What Paper to Use” for the details.
●
Change the paper size setting if you change the paper type. The setting change has to be done by the administrator. See
“3.2 Checking/Changing the Paper Supply Settings” for information on how to change the paper type setting.
●
Paper tray sizes can be changed by the Cusomer Engineer. Tray 1 can be changed to either A5, B5 , or 8.5 x 11" . Trays 2
to 4 can be changed to 12 x 18" or any non-standard sizes which are within the range of 182-297 mm (vertically) and 200-432
mm (horizontally). When 12 x 18" paper stock is loaded, however, two-sided copying is not available. When the DADF is used
to copy several sheets of documents, the output page sequence will be reversed.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Procedure
Pull out the tray until it
stops.
Always pull out a tray slowly.
The tray may hit and hurt your
knees if it is pulled out too
quickly with excessive force.
Remove any paper still
loaded in the tray.
Pinch lever A and push
the guide backward.
Pinch lever B and move
the guide to the right.
.
Changing the Paper Tray Size
●
Our Customer Engineer can also set
the paper tray size of tray 1 to letter
size.