Fuji Xerox DocuColor 1256 GA Series, Руководство пользователя, Страница: 55 / 265

Loading Paper
39
3
Loading Paper
This section explains how to load paper into trays 1, 2, 3, 4, and 5 (bypass).
●
The type of paper stock that can be loaded depends on the tray used. See “3.1 What Paper to Use” for the details.
3.3.1 Loading paper in trays 1, 2, 3, and 4
This section explains how to load paper in trays 1, 2, 3, and 4. If paper runs out during a copy job,
the message “Tray X has run out of paper. Please add XX size paper.” (X is the tray number while XX
is the paper size) will be displayed. Add paper to the tray according to the instructions shown on
the screen. Press the
Start button after you have replenished the tray. The copy job will resume.
●
You can add paper to a tray not used for the current copy job. This section explains how to load paper that is the same size
and in the same orientation as the paper that has been used up. See “3.4 Changing the Paper Tray Size” on how to change
the paper size and orientation.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Procedure
Pull out the paper tray
until it stops.
Always pull out a tray slowly.
The tray may hit and hurt your
knees if it is pulled out too
quickly with excessive force.
Load and align the paper
to the bottom left corner
with the side where
image is to be copied
facing downward.
Push in the tray slowly
until it stops.
Once you have replenished the
tray, the message “Press Start
button to continue.” will be
displayed.
●
When loading paper, do not exceed
the maximum fill line found at the
side of the tray. Overloading the
paper tray may result in faults like
paper jam.