Fuji Xerox DocuColor 1256 GA Series, Руководство пользователя, Страница: 42 / 265

Basic Copy Pr
ocedur
e
26
2
Copying onto Transparencies
You can make copies onto transparencies by using tray 5 (bypass). Select A3 or A4 for the paper
size, and
Transparency/Opaque Film for the paper type.
●
Do not load transparencies in tray 1, 2, 3, or 4 because this may cause paper jams and other faults. Use only the
recommended transparencies. Other types of transparencies may result in paper jams.
If you select Transparency Separators on the Output Format screen, the machine will insert a piece
of blank A4 paper after each transparency copy made. In this case, you must load A4 paper in either
tray 1, 2, 3, or 4 beforehand. The A4 paper used as interleaves must be set in the same orientation as
the documents.
●
Nothing will be copied onto the interleaves and they will not be counted by the meter as copies made by the machine.
●
If you put a stack of documents in the DADF and make copies of them onto transparencies, the page sequence will be
reversed because the copies are output facing upward.
5.18 Interleaving Transparencies
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Procedure
Place the document.
Load transparencies in
tray 5 (bypass).
Adjust the guide gently to align
the transparencies. The Tray 5
(Bypass) screen is shown on the
display.
Select Transparency/Opaque Film from Paper Type.
●
If you are using transparencies with
white border, place the front side on
top and load the transparencies with
the white borders at the feeding
point of the tray 5 (bypass).
●
When making copies onto opaque
films (A3 transparencies), load the
films one by one.
Chapter 4 Loading Documents
●
If the Tray 5 (Bypass) screen is not
displayed, select More... in Paper
Supply on the Basic Features screen.
Then select
5 Bypass .