Fuji Xerox DocuColor 1256 GA Series, Руководство пользователя, Страница: 46 / 265

Basic Copy Pr
ocedur
e
30
2
Copying onto Heavy Weight
Paper
Use tray 5 (bypass) to load your paper stock when you need to make copies onto special paper such
as heavy weight paper and so forth. Then select the paper type. See
“3.1 What Paper to Use” on the
types of paper that can be used.
●
Contact your Xerox Customer Support Centre when you need to make duplex copies on heavy weight paper stock using tray
5 (bypass). Our Customer Engineer will be able to replace Adhesive Paper and Labels with two of Adhesive Paper, Labels,
Heavy Weight 1 (Side 2), Heavy Weight 2 (Side 2), and Tracing Paper.
●
If you put a stack of documents in the DADF and make copies of them onto paper of HeavyWt2, SRA3 (320x450 mm/12.6 x
17.7"), or 12 x 18", the page sequence will be reversed because the copies are output facing upward.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Procedure
Load the documents.
Load paper with the side
where image is to be
copied facing upward.
Use the paper guide to
align the paper and
insert the paper all the
way into the feeding
point.
Once you have loaded the
paper properly, the Tray 5
(Bypass) screen will be
displayed.
Select the paper type.
●
If the Tray 5 (Bypass) screen is not
displayed, select
More... in Paper
Supply on the Basic Features screen.
Then select 5 Bypass...
●
The Auto Detect feature can only
detect standard paper size like A3,
B4, A4 , A4, B5, A5, 8.5 x 11" ,
and 11 x 17". Select the desired
paper size if you wish to make copies
onto paper besides those mentioned
earlier.
4.2 Loading Documents
3.3.2 Loading paper in tray 5
(bypass)
●
Load heavy weight paper horizontally
into the feeding point. (For example,
do not load A4 paper as A4 .)