Fuji Xerox DocuColor 1256 GA Series, Руководство пользователя, Страница: 34 / 265

Basic Copy Pr
ocedur
e
18
2
Basic Copy Procedure
This section explains about the basic copy procedure of this machine. The factory defaults are
Output Colour =
Auto , 2-Sided = 1 to 1 Sided , Reduce/Enlarge = 100% , Paper Supply = Auto , and
Original Type = Photo & Text (Magazine Photo) . If you make copies by using the factory defaults,
then copies made will depend on the document in terms of colour, size and magnification.
●
The factory defaults can be changed in Tools Mode. See “Chapter 6 Tools Mode Settings” on how to change the factory
defaults.
If you make copies with the document cover open, do not look directly at the copy lamp.
Direct eye exposure can cause eye fatigue or damage.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Procedure
Load the document.
●
Document glass:
Lift the document cover and
place document face down
on document glass. Align
document with the top left
corner. Close the cover.
●
Duplex Automatic Document
Feeder (DADF):
Load the document face up.
Adjust the document guide to
align the document.
Check that the Basic Features screen is displayed.
With DADF:
Without DADF:
Chapter 4 Loading Documents
●
Enter your password if the message
“Please enter your password.” is
shown on the display. If you do not
have a password, check with your
administrator. See “1.4 Entering
Password” on how to enter a
password.
●
Press the Clear All button to return
to the default screen (when the
power is switched on) if you wish to
cancel the features that you have
selected.
●
The options on the Basic Features
screen vary according to the machine
models.