Fuji Xerox apeosport-iv C3370, Руководство администратора

Страница: 407 / 889

Configuration of Scan to My Folder
407
Sc
a
n
n
e
r Enviro
n
ment
Settings
9
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
z The default user ID is "11111".
z The default passcode is "x-admin".
3) Select [Tools] on the Services Home screen.
2
Set the Login Type to Login to Remote Accounts.
1) Select [Authentication/Security Settings].
2) Select [Authentication].
3) Select [Login Type].
4) Select [Login to Remote Accounts], and then select [Save].
5) Select [Close].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
3
Configure a remote authentication server to use.
You can select from [Kerberos (Windows 2000)], [Kerberos (Solaris)], [LDAP], [SMB], and
[Authentication Agent].
Reference
z For information on the remote authentication server settings, refer to "Authentication System Setup" (P.252).
1) Select [System Settings].
2) Select [Connectivity & Network Setup].
3) Select [Remote Authentication/Directory Service].
4) Select [Authentication System Setup].
5) Select [Authentication System], and then select [Change Settings].
6) Select the remote authentication system to use, and then select [Save].
7) Select [Close].
Note
z If an authentication setting is not configured on a remote authentication server selected, configure settings
under [Remote Authenticatiosn/Directory Service]. For [LDAP Server/ Directory Service Settings], a
configuration is required regardless of a remote authentication server selected.
z For information on Kerberos Server Settings, refer to "Kerberos Server Settings" (P.252).
z For information on LDAP Server/Directory Service Settings, refer to "LDAP Server/Directory Service Settings"
(P.253).
z
For information on SMB Server Settings, refer to "SMB Server Settings" (P.257).