Fuji Xerox apeosport-iv C3370, Руководство администратора

Страница: 26 / 889

Before Using the Machine
26
B
e
fore U
sing
the
Ma
chine
1
4
Select [System Settings] > [Common Service Settings] > [Power Saver Settings].
5
Select [Power Saver Timers], and then select [Change Settings].
6
Using [ ] and [ ], set the time to elapse until entering the Power Saver mode, in 1 minute
increments.
„
From Last Operation to Low Power Mode
Set the time to elapse from the last operation until the machine enters the Low Power
mode.
Note
z The default value for [From Last Operation to Low Power Mode] is 1 minute. You cannot disable the Low
Power mode.
z
The timer does not start counting until the operator leaves the detectable area of Smart WelcomEyes. The
Access Lamp is lit while the machine detects human presence.
„
From Last Operation to Sleep Mode
Set the time to elapse from the last operation until the machine enters the Sleep mode.
Note
z
The default value for [From Last Operation to Sleep Mode] is 1 minute. To make the machine enter the Low
Power mode, set a longer period of time for [From Last Operation to Sleep Mode] than for [From Last
Operation to Low Power Mode].
z
The timer does not start counting until the operator leaves the detectable area of Smart WelcomEyes. The
Access Lamp is lit while the machine detects human presence.
7
Select [Save].
8
Select [Close] repeatedly until the [Tools] screen is displayed.