Fuji Electric ALPHA7, Руководство пользователя

Страница: 391 / 662

CHAPTER 6 KEYPAD
6-38
Positioning Data Edit Mode
6
4

Positioning status contains the following setting items.
ABS 無効
指令方式
M
コード設定 ステップモード
INC
A
無指定
継続
0
i
起動中出力
1
サイクルエンド 終了後出力
2
0 0
c o
c E
A.00.0
(2) Target position
Set the target position of the motor. The setting value range is from -2,000,000,000 to
2,000,000,000 in increments of 1.
Set the target position of the servomotor for ABS command method, and set the incremental
value for INC.
SET
(1秒以上)
ESC
点滅
Po.01.2
H - _00 L0000 C0000
Editing screen

Refer to " ■ Display and editing" in "6.7 Parameter Edit Mode".
(3) Rotation speed
Set the travel speed to the motor target position. Use the motor shaft rotation speed for the setting
value. The setting value range is from 0.01 to 6000 [r/min] in increments of 0.01.
Note that the setting speed is not the machine travel speed.
SET
(1秒以上)
ESC
点滅
Po.01.3
H -- 00 L00.01
Editing screen

Refer to " ■ Display and editing" in "6.7 Parameter Edit Mode".
Command method Step mode M code setting
Not specified
Continuous
Cycle end
Disabled
Output at
startup
Output at
completion
SET
(1 sec. or over)
Flashing
SET
(1 sec. or over)
Flashing