Fuji Electric ALPHA7, Руководство пользователя

Страница: 603 / 662

CHAPTER 14 PC LOADER
14-24
Detailed Function Description
14
 Test operation screens
(1) Manual Operation
(2) Origin Return
(3) Position Preset
(4) Set Z-phase Position
(5) Offset Adjust
Selects the speed (parameters PA1_41 to 47).
The motor rotates in the forward direction while clicked.
The motor rotates in the backward direction while clicked.
By pressing the [Origin Return] button, the motor rotates based on the
origin return related parameter settings in PA2_06 to 14.
Operation then ends when the specified origin return operation is
complete.
By pressing the [Position Preset] button, the current position is rewritten
to the PA2_19 (preset position) parameter value.
By pressing the [Set Z-phase Position] button, the Z-phase is output at the
current position (the PA1_12 (Z-phase position offset) parameter is
automatically rewritten).
* The Z-phase position cannot be set under the following conditions.

When PA2_74 (parameter write protection) is set to "1: Write protect".

When the encoder origin position (Z-phase) is not set.
At such times, rotate the motor shaft twice or more.
By pressing the [Offset Adjust] button, the analog input VREF terminal and
TREF terminal offsets are adjusted (The PA3_32 (speed command offset)
and PA3_34 (torque command offset) parameters are automatically
rewritten). Please note that offset adjustment is not possible when
PA2_74 (parameter write protection) is set to "1: Write disable".