Fuji Electric ALPHA7, Руководство пользователя

Страница: 142 / 662

CHAPTER 2 WIRING
Description of I/O Signals
2-95
2
 Related
(1) M code setting range
M codes can be set in binary from 00h to FFh.
(2) Output at startup (during startup)/output at completion (after completion)
The M code output timing can be selected between during the execution of positioning data (output
at startup) and after the execution of positioning data (output at completion).
Output at startup (during startup)
M codes are output from the start to completion of positioning operation. Output turns OFF when
the positioning operation is complete.
Rotation speed
Operation prep.
complete [RDY]
Simultaneous M code simultaneous
Time
ON
ON OFF
Auto start
AD4 to AD0
5 15
Positioning
complete (level)
ON OFF ON
M code
Timer time
(positioning data)
FF FF 20
* Positioning data is executed while the timer time is counting up.
* The default M code is FF.
M code 20