Fuji Electric ALPHA7, Руководство пользователя

Страница: 373 / 662

CHAPTER 6 KEYPAD
6-20
Monitor Mode
6
4
(12) Command cumulative pulse (displayed digits: signed 10 digits)
The number of pulses supplied to the pulse input terminal is displayed. The cumulative value
increases upon forward direction pulses, while it decreases upon reverse direction pulses. With
two signals at A/B phase pulse, each edge is counted (multiple of four). The count increases upon
B-phase advance.
L7890 C3456
- -- 12
H -- 12
on_12
SHIFT キーを押す毎に、
H/C/L
画面が切り換わります。
SET
(1秒以上)
ESC
SIFT SIFT
表示値が負の場合は、H/C/Lと負符号を
交互に表示します。
SIFT
(13) LS-Z pulse (displayed digits: unsigned eight digits)
The number of pulses in a homing counted since the home position LS signal is turned off until the
Z-phase of the encoder of the servomotor is detected is displayed. The indication is updated every
time homing is performed. Because the value is in the homing direction, no negative sign is
attached.

Displayed only if the Z-phase is enabled.
L7215 H1677
on_13
SHIFT
キーを押す毎に、
H/L 画面が切り換わります。
SET
(1秒以上)
ESC
SIFT
Press and hold the [

] and [

] keys simultaneously for at least one second to reset the
command cumulative pulses.
SET
(1 sec. or over)
ESC
If the display value is negative, the display changes
alternately between H/C/L and the minus sign.
The display changes between H/C/L each
time the SHIFT key is pressed.
SET
(1 sec. or over)
ESC
The display changes between H/L each
time the SHIFT key is pressed.