Fuji Electric ALPHA7, Руководство пользователя

Страница: 295 / 662

CHAPTER 4 PARAMETER
4-104
Input Terminal Function Setting Parameters
4
PA3_31 to 34 Speed and torque command scale and offset settings
No. Name Setting range
Default value
Change
31
Speed command scale ±1.0 [V]/ to ±100.0 [V]/ Rated rotation
speed
5.0
Always
32 Speed command offset -2000 [mV] to 2000 [mV] Shipment setting
33
Torque command scale ±1.0 [V] to ±10.0 [V]/ Torque
command offset
3.0
34 Torque command offset -2000 [mV] to 2000 [mV] Shipment setting
Specify the scale (gain) and offset of the analog input signal.
PA3_35 Zero clamp level
No. Name Setting range Default value Change
35 Zero clamp level 0 [r/min] to 500 [r/min] 0 Always
Rotation speeds less than the specified value are clamped (fixed) at 0 [r/min].
This is used in such cases as when wishing to avoid the influence of offsets, etc. on analog input
voltage used for the speed command value or speed limit value.
PA3_36 Deviation clear input form
No. Name Setting range Default value Change
36
Deviation clear input
form
0: Edge 1: Level 0 Power
Specify the deviation clear input signal format.
Select 0 (edge) to reset position deviation at the rising edge timing.
-5.0V
+5.0V
Speed command scale (default value)
-3.0V
+3.0V
Torque command scale (default value)
Rotation speed
Rated rotation
speed
Offset
VREF input voltage
Rated torque
Rated rotation
speed
Rated torque
TREF input voltage
Offset
Output torque