Fiat Punto 2004 Скачать руководство пользователя страница 456

Страница: 456 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

It is a control with two contacts (N.O. + N.C.) with separate power supply and the same

interface on the cable harness side.

Below are the control units that request the indication of the brake pedal status:

Body Computer control unit;

engine management control unit;

braking system control unit (for both versions: ABS and ESP);

robotized gearbox.

9.2.12 Control board on the driver’s side front door (DDC)

The control board on the driver’s side front door (DDC) is a module that integrates the different

controls located on the driver’s side front door and is interfaced with the driver’s side front door

cable harness. The DDC control board receives the power supply for ideograph lighting and

correct control operation. It may feature the following controls, depending on the body version

level:

front electric window regulator control;

rear electric window regulator (if available) controls;

rear electric window regulator (where available) cut-off controls, with respective LED

electric side mirror selector;

electric side mirror control joystick.

Three window regulator control module models are available, depending on the vehicle’s body

version, which feature three different types of window regulator motor controls.

The electric window regulator controls of the base model directly drive the motors of the

driver’s and passenger’s side front window regulators only, with no electronic control on the

motors themselves. This model does not feature rear electric window regulator control.

gb Fiat Grande Punto OK

455 / 532

The second model incorporates an electronic module for controlling the up and down

movement of the driver’s side front electric window regulator only, in automatic mode.

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды