Fiat Punto 2004 Скачать руководство пользователя страница 418

Страница: 418 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Set-up menu

The set-up menu functions can be actuated only when the vehicle is stopped, except for the

“speed limit” function (speed limit threshold and speed limit actuation/deactivation selection).

Pressing the “Menu / Esc”, “+” and “–“ buttons will allow you to select, adjust and set the

displayed values.

If no operation is carried out for some time, the standard screen will be resumed.

Mode panel

Speed: speed limit threshold selection and setting: the “SPEED” writing appears in place of

the odometer; “k.p.h.” or “mph” writing depending on the set unit of measurement; “OFF” or

“ON” writing and speed limit in place of the clock, with a range of 30 to 250 k.p.h. (20-155

m.p.h.) and a step equal to 5 k.p.h. (5 m.p.h.).

Clock setting: the “Hour” writing appears in place of the odometer.

Buzzer setting (one single setting for the alarms, faults, warnings, button pressing): 0 (mute) to

7 (max. volume) with the “Buzz” writing in place of the odometer.

Setting the unit of measurement (distance): “Unit” writing in place of the odometer.

Comfort and Matrix panels

Speed: speed limit threshold selection and setting.

Twilight sensor sensitivity level control (where the twilight sensor if available).

Trip “B” actuation/deactivation.

Clock and time format (12/24 h) setting.

Date setting.

Audio information repeat actuation/deactivation.

Actuation/deactivation of automatic door/boot locking above 20 k.p.h.

gb Fiat Grande Punto OK

417 / 532

Setting the units of measurement (distance, consumption, temperature).

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды