Fiat Punto 2004 Скачать руководство пользователя страница 432

Страница: 432 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

the respective icon (“snow” symbol) (Matrix panel only).

The warning cycle is carried out only once after an external temperature equal to or lower than

3°C has been recognized; it can be repeated only if the temperature reaches a value of more

than 6°C and then is again equal to or lower than 3°C.

Warning/danger signalling: “Doors/boot open”

In order to warn the driver that one or several doors or the boot are open, the corresponding

message will be shown on the display as soon as a door or the boot opens. The warning

light/icon will remain ON until all the doors and the boot of the vehicle are perfectly closed.

Moreover, an acoustic signal is actuated when the doors are open while the vehicle is running.

Tyre pressure control (OPT TPMS)

Available only with the Comfort and Matrix panels.

The TPMS system monitors two tyre pressure control thresholds corresponding to the low

pressure and tyre puncture conditions.

In the event that each of these thresholds is exceeded, the respective signalling warning

light/icon will be actuated, and the respective message will be shown on the display. In case of

tyre puncture, the panel will also generate an acoustic signal.

Moreover, a TPMS failure signalling (warning light/icon + message) is available.

Operating conditions

The following functional degrading is permitted during the thermal motor starting phase:

no display back-lighting;

softer panel back-lighting (graphic elements and pointers).

After the transient is over, all the functions will be restored.

However, the maintenance and subsequent use of the data relative to the functions below

shall be ensured during this phase, even following a reset (if any) during the cranking phase:

clock/date;

trip computer (A and B);

gb Fiat Grande Punto OK

431 / 532

trip odometer (included in the trip computer).

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды