Fiat Punto 2004 Скачать руководство пользователя страница 479

Страница: 479 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Anti-pinch safety device

The versions equipped with four electric window regulators (front and rear) feature a safety

system capable of detecting the presence of an obstacle during the window upward closing

movement. When such an obstacle is detected, the system will interrupt the window travel

and, depending on the window position, will also reverse its motion.

The system causes the window regulator motion to be reversed every time an obstacle (e.g.

finger, hand, etc.) is detected during the window travel, thus avoiding accidental crushing. This

feature ensure a very high degree of safety, even in the event that a window regulator is

unintentionally actuated by a child on the vehicle. This makes it possible to actuate window

superior opening/closing when you leave the vehicle. The anti-pinch function is ON during

both manual and automatic operation of the window.

Two zones (“inversion” and “non-inversion”) can be defined fro the anti-pinch system:

the “inversion” zone corresponds to the space included between 200 mm from the upper edge

and the latter;

If, on the contrary, an obstacle is detected in the “non-inversion zone” during the window

upward movement, the system will interrupt the upward movement.

In the event that the battery is disconnected and re-connected, the following procedure shall

be carried out in order to resume correct operation of the front windows:

the “non-inversion” zone corresponds to the remaining space.

If an obstacle is detected in the “inversion zone” during the window upward movement, the

system will interrupt the upward movement and will immediate reverse the direction.

No control will be accepted during this time.

If the anti-pinch protection comes into operation five times in a row within one minute or is out

of order, the automatic window upward operation will be disabled, i.e. it will only be allowed

with jerks lasting half a second, with button release for the subsequent operation.

To resume the correct operation of the system, any of the following restore conditions shall be met:

a key-OFF/key-ON operation;

gb Fiat Grande Punto OK

478 / 532

a downward movement (actuated by the user) of the window at issue.

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды