Fiat Punto 2004 Скачать руководство пользователя страница 350

Страница: 350 / 533

BRAKES

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

6.4 ABS system

All the Nuova Punto versions are equipped with the Bosch 8.0 ABS antilock system, with built-

in EBD (Electronic Brake force Distribution), which controls the braking action so as to prevent

rear wheels from being locked, thus ensuring correct distribution of the braking action to the

axles under any condition.

The Bosch 8.0 ABS system is one of the most advanced systems currently available on the

market. The system is made up of the components below: one hydraulic control unit with 12

solenoid valves, 4 active sensors and 4 channels with braking corrector (distributor).

The system’s peculiarities as far as active safety is concerned are as follows:

it ensures that every wheel about to be locked is braked as efficiently as possible, compatibly

with the road grip conditions available;

it ensures full vehicle control under extreme conditions, when the wheels are about to get

locked;

it ensures prompt control response;

it is capable of adjusting itself automatically to a wide range of operating conditions;

the control unit is lightweight.

The function of the active sensors is to measure the wheel speed.

The main peculiarity of active sensors is that the signal is processed directly by the sensor.

The active sensors enhance the accuracy of the vehicle’s control systems, thanks to the

capability of detecting very low speeds (2.7 k.p.h.).

gb Fiat Grande Punto OK

350 / 532

Moreover, the information gained by the ABS active sensors are used to update, by means of

the GPS (Global Position System) satellite detection system, the position of the vehicle on the

maps included in the memory. Therefore, continuous information is essential, even at low

speeds, about the road along which the vehicle is driven, to calculate the exact position of the

vehicle.

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды