Fiat Punto 2004 Скачать руководство пользователя страница 442

Страница: 442 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

When the steering column stalk ring is moved from the speed 1 position to the

intermittent/automatic operation position, a windscreen wiper stroke will occur to indicate that

the rain sensor has been actuated.

If the rain sensor sensitivity is modified (i.e. its value is increased) when the rain sensor is

operating, a windscreen wiper stroke will occur to indicate that the modification has been

made.

In case of rain sensor anomaly (sensor failure), the following strategies will be performed:

if the anomaly occurs upon actuation (when the ring is being turned from the rest position to

the intermittent/automatic operation position), the windscreen wiper will be immediately set to

the intermittent operation, regardless of whether rain is found on the windscreen.

If the anomaly occurs during operation (the ring has already been turned to the

intermittent/automatic operation position, with resulting rain sensor actuation), the windscreen

wiper will be driven according to the latest command sent by the rain sensor until the user

either selects other speeds (continuous speed 1 or 2) or turns the windscreen wiper operation

off (ring position: OFF). In the event that any of the above-mentioned actions is carried out,

any further resumption of the intermittent/automatic position will make the windscreen wiper to

operate in the intermittent mode, regardless of whether rain is found on the windscreen.

In any case, the instrument board will signal the sensor failure; this makes it possible to inform

the user of wrong sensor operation. The failure indication will remain ON until the failure is no

longer found.

Smart front washing:

By pulling the steering column stalk lever to the right, front washing will

be actuated. If the lever is pulled upwards for more than 0.5 seconds, the windscreen wiper

will be automatically made to operate at continuous speed 1. When the control is released, the

washing will be turned off and three further windscreen wiping strokes will occur, followed by

one further wiping every 6 seconds to remove dripping.

gb Fiat Grande Punto OK

441 / 532

In the event that the windscreen wiper has already been actuated prior to actuating the

washing control through the lever, the smart washing logic will only be performed to actuate

the same in the intermittent mode.

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Fiat Punto 2004, Руководство по обучению, Страница: 442 / 533

Результаты поиска

Содержание Punto 2004

Отзывы: